Not Sure What Auxiliary Switch to Go With? Start With the Fuses and the Wire

Not sure what auxiliary switch to go with? The switch itself is the easy part. The parts that matter are the fuses behind it, the wire feeding it, and whether you can actually reach the controls when you need them.

Shoreline's Pro Series 16-switch panel is built around that idea. Fuses run from 10A to 50A across all 16 circuits — including the two largest, one 50 amp fuse and two 35 amp fuses — giving you more options to wire products and equipment, from wheel lights and Ultra Pro rock lights to anything else on the rig. It runs on 4ga power and ground, so the panel and the wires are not asked to do more than they should on a loaded build.

Control is wireless where it counts. You get a wired 16-switch panel plus a wireless 16-switch remote, so switching does not depend on an app. The app lives inside each individual RGB light, where it controls that light's own colors and modes — the panel itself is not app-controlled.

One panel. Everything lit. No guesswork about which fuse, which wire, or which switch runs what.

FAQ

Q: Does the panel need an app to switch lights?
A: No — wired panel plus wireless remote. The app is inside each RGB light for its own colors/modes.

Q: What does the panel power?
A: Up to 16 accessories on 12V/24V systems; check each light’s draw against the panel’s 1,200W at 12V rating.

Q: Why 4ga power and ground?
A: To avoid overheating the unit and wires.

Shop the Pro Series lineup at shorelineoffroadco.com — or call us at 941-348-6886. Bradenton, FL. From Coast 2 Krawl, we light it all.